Order by 3 pm and it ships the same day · Free delivery across India
Indigo PeptidesCertificate of analysis
Certificate
IP-COA-GK-261005
Issued
5 October 2026
Status
released

GHK-Cu

Copper(II) complex of the tripeptide glycyl-L-histidyl-L-lysine

BatchIP-GK-261001This is the code printed on your vial.
Applicable strengths
  • 50 mg
  • 100 mg
99.29%RP-HPLCSpecification ≥ 99.0%

Full analytical results

Tests and specifications

TestMethodSpecificationResultStatus
AppearanceVisual inspectionBlue to deep blue lyophilised powderConformsPass
PurityRP-HPLC (C18, 220 nm, water/acetonitrile with 0.1% TFA)≥ 99.0%99.29%Pass
IdentityESI-MS[M+H]+ = 402.92 ± 0.50402.76Pass
Copper contentICP-OES10.5 to 12.5% w/w11.75%Pass
Free copperICP-OES after solid-phase separation≤ 0.5%0.20%Pass
Related substancesRP-HPLC, any single impurity≤ 1.0%0.49%Pass
Water contentKarl Fischer titration≤ 8.0%3.85%Pass
pH, 1% aqueous solutionPotentiometry at 25 °C4.5 to 7.05.9Pass
Bacterial endotoxinsKinetic chromogenic LAL< 1.0 EU/mg< 0.125 EU/mgPass
SterilityMembrane filtration (USP <71>)No growthNo growthPass
Residual solventsHeadspace GC-FID (USP <467>)Acetonitrile ≤ 410 ppm, methanol ≤ 3000 ppm, dichloromethane ≤ 600 ppm (ICH Q3C)ConformsPass
Elemental impuritiesICP-MS (USP <232> and <233>)Pb ≤ 5, Cd ≤ 2, As ≤ 15, Hg ≤ 3 µg/day (ICH Q3D, parenteral)ConformsPass

Chromatogram

Reversed-phase trace, GHK-Cu, batch IP-GK-261001Reversed-phase HPLC trace. One dominant peak at 12.7 minutes, 99.29 percent of total peak area. Largest single impurity 0.49 percent.02505007501000051015202530mAURetention time (minutes)12.7 min99.29% area

Reversed-phase trace for this batch. One dominant peak at 12.7 minutes, 99.29% of the total peak area, largest single impurity 0.49%.

Mass spectrum

ESI mass spectrum, GHK-Cu, batch IP-GK-261001Electrospray ionisation mass spectrum. Base peak 402.76 m/z, charge state 1, expected 402.92.0255075100300350400450500Relative intensity (%)m/z402.76[M+H]++Na

Electrospray ionisation. Expected 402.92, observed 402.76, a difference of -0.16 m/z at charge state 1. The smaller peak to its right is the sodium adduct, [M+Na]+, which electrospray produces alongside the protonated ion.

Reference data

Also known as
Copper peptide, Glycyl-L-histidyl-L-lysine copper
CAS number
89030-95-5
Molecular formula
C14H22CuN6O4
Molecular weight
401.91 g/mol
Sequence
GHK
Modifications
The 1 to 1 copper(II) complex, registered as copper tripeptide-1. The free tripeptide without copper is 340.38 g/mol and the 2 to 1 complex is 742.30, so a quoted mass identifies which species is in the vial.

Public reference values for the compound, not measurements on this batch. The batch measurements are in the table above.

Storage and handling

Unopened
2 to 8 °C, away from light
Long term
−20 °C, lyophilised, for the stated shelf life
Reconstituted
2 to 8 °C, use within 2 weeks; protect from light
In transit
Stable at ambient temperature for up to 30 days
Reconstitute with
Bacteriostatic water

The vial this covers

The label on your vial carries the same batch code as this certificate, IP-GK-261001, and the QR goes to the results for it. If the code on the vial is not this one, the certificate for it is on this page under earlier batches.

Sticker shown at its printed size, 40 by 20 mm. Cap colour may vary by batch.

Release

Batch date
1 October 2026
Analysis date
4 October 2026
Issue date
5 October 2026
Best before
October 2028
Released by
Quality review, Indigo Peptides
Document
Valid only in its original, unmodified form

Results are taken from the batch testing documentation for this exact batch, supplied with the finished vials and held on file by us. Every value above is for the batch named on this certificate and for no other.

Holding an older vial?

BatchpurityAnalysed
IP-GK-26091199.34%14 September 2026

If the code on your vial is one of these, it is an earlier batch of ours and these are its results. A result we have published is never removed and never recalculated.